ESP8266 Web Server Serial WiFi Expansion Board ESP-13 for Arduino

Product Description

• _{This WiFi uses industrial-grade chips ESP8266, modules for the ESP-12E with metal shield, anti-jamming;}
• _{The standard pin-compatible Arduino Uno, Mega2560 and other control boards, Arduino UNO connection with the use of a voltage converter chip, so 3.3V and 5V compatible;}
• _{Dual serial ports using DIP switches control so that expansion board can be used alone as an Arduino Uno expansion board, it can also be used as ESP8266 expansion board use;}
• _{Serial WiFi, Arduino program does not need any configuration;}
• _{It is based on WiFi Web Server configuration parameters and serial port parameters;}
• _{It can be used as an independent ESP8266 development board, download the official AT commands firmware, NodeMCU open source firmware;}
• _{It can be used as stand-alone expansion board Arduino Uno use, pin all the leads.}

Product Specs:

• _{Wireless 802.11 b / g / n standards;}
• _{Support for STA / AP two modes of operation;}
• _{Built-in TCP / IP protocol stack, you can configure a socket;}
• _{Supports standard TCP / UDP Server and Client;}
• _{Serial port baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;}
• _{Serial data bits: 5/6/7/8 bits;}
• _{Serial parity: none;}
• _{Serial stop bits: 1/2 bit;}
• _{Standard Arduino UNO, Mega pitch;}
• _{Leads Arduino Pin 2/3/4/5/6/7/8/9/10/11/12/13;}
• _{Leads ESP8266 GPIO 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / UART TX / UART RX;}
• _{RESET reset;}
• _{KEY button multiplex configuration function;}
• _{Two DIP switches enable switching Arduino and ESP8266 serial port expansion;}
• _{WiFi current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA;}
• _{Wireless transmission rate: 110-460800bps;}
• _{Working temperature: -40 'C ~ + 125 'C}
• _{Module Weight: about 20g}

^{Locally Stocked! Available for Immediate Shipping.}