Master 3S Plus Laser Engraver + Cutter Machine + 40W/80W Laser Module

Product Description

The is the awesome and powerful Master 3S Plus Laser Engraver + Cutter Machine + 40W /80W Laser Module. We offer them with 2 options, the 40W, and 80W laser engraver and cutter. Software is provided for FREE and bundled with the laser machine.

[170 x 170 mm] Moderate use area, and under the protection of MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. 2266 x 2266 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.

Advanced laser module: The laser beam is formed by combining two high-power laser diodes and adopts FAC technology. The minimum focus point reaches 0.04x0.04mm(A40640 module). Support NEJE advanced laser module, Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.

More materials, clearer: Wood, MDF, leather, paper, cotton, etc. are all supported. 8mm plywood only needs air-assisted cutting once (A40640), and the cutting is very clean. Can directly engrave stainless steel, glass, transparent acrylic, and so on.

Portable professional control software - 32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services.

NEJE A40640 module is a zoom carving and cutting module specially designed to overcome high hardness materials and high-speed engraving, and it also has the strong cutting ability. NEJE adopts NEJE's unique optical processing technology to compress the focus to 0.04x0.06mm and has 12W pulse Power, focus is clearer than ordinary 2 LD modules, there is no stray light interference on the edge, each pixel is powerful, it can directly and clearly engrave grayscale images on stainless steel and stone surfaces, as well as on wooden 3D images\ Plasma high-definition effect. Stronger energy density and clearer engraving focus than the 4xLD laser module can be said to be the king of engraving. The NEJE A40640 module is a zoom focus module, which can obtain a 20mm thickness cutting ability at a 55mm focus, and has an excellent performance in cutting acrylic, wood board, fabric, balsa, corrugated paper, EPE, and other materials. NEJE designed a metal quick-release air nozzle for the A40640 module, which can be compatible with cutting needs of different focal lengths. The latest lens has added a high-temperature window lens, which can effectively prevent water and smoke from damaging the lens. If you want to find a model that can A module that solves almost all your needs, A40640 is the best choice.

Product Specs

• Frame size (L - W -H): 550x480x140mm
  
• Working area( X - Y): 255 x 420mm
• Dot Pitch: 0.075mm, 338dpi
• Pixel: 2400 x 5600 px
• Drive accuracy: 0.01mm
• Max Move Speed: X:1500mm/s(with A40640 module 204g), Y:1000mm/s
• Frame Material: High precision PC material hybrid frame
• Structure Feature: Fit, High precision, stablize, smooth, no oil, easy maintenance, long life
• Vertical Carving: Yes (45°)
• Motor Size: 42 x 42 x 50mm
• Motor Drive Current: 0.9A
• Module Height Adjuster：Yes
• Home: Rear Left
• Origin: Front Left
• Compatible Modules: All NEJE 4pin 12V Laser Moudle (Recomend: A40640, N40630, A40630, E40, N308220, N30610, B30635)
• MCU: 32-bit 200Mhz MCU (Top 32-bit MCU)
  
• BLE APP control: Yes
• MEMS protection: Yes
• M7 Control: Yes (For building automatic smoke extraction systems)
• M8 Control: Yes (For building automatic air assist systems)
• Door Control: Yes (Emergency Suspension and Safety Door Control)
• Limit Switch: Yes
• ON/OFF Switch: Yes
• Input: DC 5.5 2.1, 12V 4A or 5A (Power Adapter)
• System: Win 7 / Win 8/ Win 10, Android, iOS, ipadOS, macOS, HarmonyOS.
• File format supports: SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc.
• OTA Upgrade: Yes
• NEJE Win Software: Yes, It is recommended to open the NEJE software to update to the latest firmware for the first time use.
• Lightburn and LaserGRBL: Yes, improved low light function, added M8, M7, emergency stop extended automatic control, optimized GRBL interaction.
• Off-Line Working: Yes, In NEJE Win software and NEJE APP mode, when the image is transferred to the device, it can work independently from the computer or mobile phone.
• Repeat Engraving: Yes, After the engraving or cutting is completed, the device will not lose the location information, if you are not satisfied with the work, you can continue to work.
• NEJE Android APP: Yes
• NEJE iphone/iPad APP: Yes
• NEJE Cloud Gallery Service: Yes
• Software Download: Https://neje.wiki

A quick video guide below on how to assemble the machine and get started!

1. Newly added 2S 32-bit chip, smarter and more efficient processing effect.

2. Two-in-one zoom laser module, adjustable lens and fixed focal length in one module, 7.5W optical power output, suitable for engraving and cutting.

3. Wireless APP operation, more convenient, DIY work anytime, anywhere.

4. Engraving area of 170*170mm, no volume or weight limit for engraving.

5. Built-in safety protection device, more assured and safe operation.

6. It can support a variety of modules: 3500mw/7W/20W/30W/40W - We offer 30W and 40W  - the real power :-) 

Product Features

1. NEJE brand new master 2s series motherboard’s hardware performance; 2s series motherboard will update the GRBL 1.1f of ATMELs chip to brand new GD32 MCU. Which has improved 50% performance compare with STM32 chip.

2. It supports more than 10 different function modules, the NEJE module has excellent optical design and reliable work performance, which is the best and the most guaranteed service currently. Each NEJE module has an intelligent control function, which is quieter to use, and has a heat management function to ensure that each module runs at a safe temperature and obtains a longer service life. NEJE series module provides 2 years free warranty.

3. Specializing Motherboard with GD32 MCU.

4. It could preprocess 32 instructions, support a baud rate as high as 2,000,000, compared to STM32 desktop laser engravers, which only have 921,600, more powerful!

5. Engraving speed could be as high as 42,000 millimeters/Min. ( If do not consider the laser carving result, the speed of movement could be as high as 1200millimeters/Sec. ); compared to stm32 desktop laser engravers, which only has 3000 millimeters/Min, more powerful!

6. The Most Advanced 32Bits Laser Engraver Firmware, smarter, faster, higher precision, and easier to use. NEJE also provides firmware upgrade services

7. Laser power range could be S0 - S1000, NEJE Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper, to match with NEJE series module can achieve the more accurate effect.

8. Active Position Protection，There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.

9. Exposure Duration Detection and Limitation，If the laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.

10. NEJE software ( free software ) supports windows 7, 8, 10. Macs OS. NEJE APP including android, iOS macOS, NEJE team develops it which is for beginner, it can provide high precision carving and CNC creation’s software, the operating procedures are automatic and simple, safe use. Especially the current engraving software, the NEJE team keeps upgrade and optimization, also provides free upgrade services, you can get free upgrade services in wiki.nejetool.com

11. Laser GRBL ( free software ) supports Windows XP, 7, 8, 10. Laser GRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser Laser GRBL for engraving and cutting.

12. Light Burn ( paid software, light burn software.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.

13. NEJE module supports PWM control and temperature sensing, the module can adjust the focus by up and down, it also supports zoom module’s and focuses module’s installing.

14. Pre-assembled parts, it just has to install 4 screws, need 1 minute to install the machine.

15. 170 x 170 mm large engraving area. The widest space is less than 600 millimeters, it just able to place a whole home-used table.

16. Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance, NEJE structure is different from other acrylic main structure, NEJE machine is using high-strength composite mostly. It also uses CNC art craft, to make sure pulley and aluminum material without any gap. Besides, it won’t deformation for a long time, which means it is robust and reliable.

Some extra cool features

• 【More Convenient】Off-line and APP Wireless Control. NEJE Scanner Wireless Transfer. Cloud Gallery and Online Gcode Make Creation Easier.
• 【Professional CNC software】LaserGRBL. 170 x 170 mm Engraving Range. Operating System: Windows 7/10 / android / iOS / macOS. Picture format:  BMP / PNG / JPG / NC / DXF,etc."
• 【Safe To Use】Built-in MEMS sensor protection, when accidentally touched, the machine will automatically stop working.
• 【Carved Material】It can carve MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal)

Machine Addons

CNC Software: Add the Lightburn Software to the machine if you'd like to use lightburn, there are alternatives like lasergrbl software that can be used. Lightburn is the preferred software for this machine.

Materials tested on:

Product Package

1 x Master 3S Plus Laser Engraving Machine
1 x Laser Module
4 x Nuts
1 x goggle
2 x L-shaped wrench
1 x USB Cable
1 x 12V3A Power Adapter

Neotronics SA has been in the CNC Laser industry for over 7 years, with excellent product knowledge and quality service, feel free to reach out to us!

Please confirm Availability.