•   067 6866 240 | 079 2651 517

  •   sales@neotronics.co.za

My Cart0 R0.00
  • Your shopping cart is empty!

xPRO V5 GRBL Controller Kit for CNC Router Machine

xPRO V5 GRBL Controller Kit for CNC Router Machine

Product Code: xPRO-v5-Kit
Availability: Out Of Stock
R5,990.00

xPRO V5 GRBL Controller Kit for CNC Router Machine

Product Description

This is the xPRO V5 GRBL Controller Kit for CNC Router Machine, we have upgraded our GRBL Lead CNC and WorkBEE CNC machine to use this awesome xPRO V5 controller kit.

The xPRO V5 Motion Controller Kit contains all the hardware for powering and controlling your WorkBee, Ox, Lead CNC, or other CNC machines.

The cables on this “Large” Bundle are designed for machines of the following sizes:

  • 1000mm x 1000mm
  • 1000mm x 1500mm
  • 1500mm x 1500mm


Product Specs:

Controller

xPRO V5

  • High Power 6A stepper drivers based on the Trinamic TMC5160
  • Sleek Web Interface with cut-from-SD capability (SD card included)
  • USB-C interface work with GRBL sender programs
  • Built-in Heatsink & Temperature Controlled Cooling Fan
  • Fully assembled in a custom ABS case
  • VFD support – PWM, 0-10V, and RS485
  • Laser support – PWM, 0-5V, 0-10V
  • XYZ Probe input
  • Integrated relay
  • 4 software defined, independent motor drivers can:
  • Clone any axis (default to XYYZ)
  • True 4 axis motion XYZA
  • Safety Door/Estop switch terminal
  • Integrated power switch
  • Selectable limit switch voltage (5V or 24v)

Power:

  • Output Voltage-Channel: 24V
  • Output Power: 348 W
  • Enclosed Case
  • Input Voltage: 90 VAC to 132 VAC/180 VAC to 264 VAC, 240 VDC to 370 VDC
  • Output Current-Channel: 14.6A
  • Mounting Style: Chassis
  • Length: 215 mm
  • Width: 115 mm
  • Height: 30 mm
  • Input Frequency: 47 Hz to 63 Hz
  • Unit Weight: 760 g

Cables & Connectors:

  • 4 Core and 2 Core shielded cable for best performance and reduced EMI
  • EDG 4 pin Connectors included
  • 16 AWG for Power Supply to CNC xPRO V5
  • 2 core DC Cable for E-Stop

Limit Switch Kits

  • 3 x Micro Limit Switch
  • 3 x Limit Switch Plate
  • 6 x M3 10mm Cap Head Screw
  • 3 x M5 8mm Low Profile Screw
  • 3 x M5 Drop-in Tee Nut
E-Stop Switch
  • E-Stop Switch
  • Max Current: 10A
  • Max Voltage AC 660V
  • Rated Load:
  • AC: 220VAC/6A, 380VAC/4A, 660VAC/2A
  • DC: 440VDC/0.3A,  220VDC/0.5A, 110VDC/1A
  • TYPE: N/C
  • Withstand Voltage: 2500V /60S
  • Temperature: -25°~+55°
  • Contact resistance:  <25mΩ

NOTE: The holes in the switch will need to be opened a little (3mm drill bit) to allow for the M3 screw or alternatively you can use an M3 tap to cut a thread into the plastic.

The 4 core and 2 core shielded cables are cut in the proper length for customers convenience which meets the needs and multifunction of different size of our CNC Machine.

This high-quality 4 core cable has 2 layers of insulation and 2 shield layers to reduce signal interference and maximize efficiency.

The four insulated wires are shielded by oxygen-free tinned annealed copper wire braid with Aluminium/PET tape (100% coverage) to shield the cores from EMF interference.

This is again insulated by a thick clear layer of thermoplastic sheath insulation. Suitable for applications requiring electrical/electronic screening of cable. 22AWG is suitable for 300V DC and up to 80°C



Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

Submit Your Quotation

Fast Overnight Delivery

Excellent Pricing

Low Shipping Rates

Excellent Customer Support