Stepper Motor Nema 34 - 4 Axis Complete Kit

Product Description

This is the complete stepper motor kit that comes with the motors, drivers, power supply, and controller of your choice.

This complete kit comes with either MKS3-V controller or XHC ethernet controller. 

Some of the benefits of this kit:

1. Without losing step,high accuracy in positioning

2.100%rated output torque

3.Small vibration,Smooth and reliable moving at low speed

4.Compatible with1000 lines encoder

5.Over current,over voltage and over position error protection

Product Specs

Stepper Motor

• Current / Phase : 6A
• Holding Torque: 8.5N.m
• DC Resistance: 0.61Ω±10%
• Inertia : 2.7KG.CM2
• Inductance / Phase : 5.9MH±20%
• Weight: 4.1KGS
• Step Angle: 1.8°
• Position Accuracy: 1.8°±0.09°
• Temp Rise (Max) : 80℃
• Dielectric Strength: 500VDC
• Number of Phase: 2
• Radial Play : 0.025mm (LOAD450G)
• Axial Play : 0.075mm (LOAD920G)
• Insulation Resistance: 100MOHM (500VDC)
• Insulation Classe: B

Stepper Driver

• No step loss, precise positioning
• 100% rated torque drive motor
• Variable current control technology, high current efficiency
• Low vibration, stable operation at low speed
• Built-in acceleration and deceleration control to improve the smoothness of start and stop
• Users can customize segmentation
• Compatible with 1000-line and 2500-line encoders
• Overcurrent protection, overvoltage protection, over-tolerance protection
• Green light means running, red light means protection or offline

Power Supply 1

Power Supply 2

Motion Controller Card - Option 1

• Axis output control:
• Drive Current: Isolated open collector output; 5V, 20mA
• Drive : Pulse + direction output
• Output frequency : 2000KHZ
• Axis: 4-axis
• Isolation Voltage: 3.5KV
• Spindle inverter
• output: 3 types of output modes:
• Analog voltage output : 0—10V
• PWM output : 5V,1KHZ,Duty;0-100%
• Pulse+direction output : 5V,15HZ to 4KHZ
• 4 IO output Drive Current : Isolation:50mA, 25V
• 4 IO output Isolation Voltage : 3.5KV
• 8 IO intput Input Current : Isolated inputs, 5 mA, maximum voltage 25V
• 8 IO intput Isolation Voltage : 3.5KV
• USB interface : Complies with USB2.0 standard

Motion Controller Card - Option 2

Please confirm Availability.